Modifications apportées à l'étape #5
Modifié par Benjamin Doron —
Modification approuvée par Benjamin Doron
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Release the SATA connector and USB flex cable from the board. |
|---|---|
| + | [* black] Release the SATA hard drive connector and USB flex cable from the board. |
| [* icon_note] Removing the SATA connector may be optional, but the battery screw must be accessible. | |
| - | [* icon_note] To make the battery screw more accessible, consider releasing the SD card board connector and remove the SATA drive. |
| + | [* icon_note] To make the battery screw more accessible, consider releasing the SD card board connector and remove the SATA hard drive. |
| [* black] Release the USB connector from the breakout board. | |
| [* icon_note] This USB cable is attached to the original battery. Remove and reattach to the replacement battery, if necessary. |