Modifications apportées à l'étape #6
Modifié par Andrew Federico —
Modification approuvée par Andrew Federico
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* |
|---|---|
| + | [* red] Use the Phillips #00 to remove the screw holding the battery in place. |
| [* icon_note] There may be a second screw holding the battery in at the bottom left. | |
| - | [* |
| + | [* red] Disconnect the battery connector from the board. Grasp it between two fingers and slowly pull it loose. |