Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par David Hodson

Validation en attente


Lignes de l'étape

[* black] There are 2 more screws hidden by the labels on the bottom of the case.
[* black] You can either remove the labels or simply feel for the screw holes thru the labels and cut/punch a hole thru them.
[* icon_note] These labels are "Tamper Resistant" and will usually reveal a checkerboard pattern when removed. To reduce the likelihood of this happening, use a hair dryer or heat gun to '''WARM''' the stickers and soften the adhesive first, but it may still appear, however '''it won't be as bad'''.
[* black] The picture of the lime green xbox shows the result of removing the sticker without heating it up first.

Image 3