Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Richdave

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Remove bothThere are 2 more screw hidden by the silver sticker andlabels on the white bar code sticker to reveal two additional screwsbottom of the case.
[* black] You can either remove the labels or simply feel for the screw hole thru the labels and cut/punch a hole thru them.
[* icon_note]
These labels are "Tamper Resistant" and will usually reveal a checkerboard pattern when removed. To reduce the likelihood of this happening, use a hair dryer or heat gun to '''WARM''' the stickers and soften the adhesive first.
[* black] Remove bothThere are 2 more screw hidden by the silver sticker andlabels on the white bar code sticker to reveal two additional screwsbottom of the case.
[* black] You can either remove the labels or simply feel for the screw hole thru the labels and cut/punch a hole thru them.
[* icon_note]
These labels are "Tamper Resistant" and will usually reveal a checkerboard pattern when removed. To reduce the likelihood of this happening, use a hair dryer or heat gun to '''WARM''' the stickers and soften the adhesive first.
[* black] The picture of the lime green xbox cover shows the result of removing the sticker without heating it up first.