Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Nick

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* yellow] Use a T20 Torx screwdriver to remove the four screws located under the rubber feet you just removed as well as the two screws from beneath the stickers removed in the previous step.step or, if you dont wanna peel it every time you should cut a hole being microsoft no longer supports this console and do the same with the silver sticker if you dont wanna heat the sticker every time
[* yellow] Use a T20 Torx screwdriver to remove the four screws located under the rubber feet you just removed as well as the two screws from beneath the stickers removed in the previous step.step or, if you dont wanna peel it every time you should cut a hole being microsoft no longer supports this console and do the same with the silver sticker if you dont wanna heat the sticker every time