Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par Richdave

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Move the grey ribbon cable out of the way in order to reach and remove three 3 mm screws usingred] Remove 3ea 3mm T10 Torx screwdriver. They are located on the upper right corner, lower right, and lower left corners of disk drive.
[* icon_note] The
screws. There is 1 screw on the lowerrear left cornerside of the diskhard drive that is not inonly visible when the hole that it appears to be in, but rather just closer toIDE ribbon cable is lifted up. The other 2ea are at the corner.
[* blue] NOTE: The screw on the lower
front - right and left corner of the disk drive is not in the hole that it appears to be in, but rather just closer to the cornerhard drive.
[* black] Move the grey ribbon cable out of the way in order to reach and remove three 3 mm screws usingred] Remove 3ea 3mm T10 Torx screwdriver. They are located on the upper right corner, lower right, and lower left corners of disk drive.
[* icon_note] The
screws. There is 1 screw on the lowerrear left cornerside of the diskhard drive that is not inonly visible when the hole that it appears to be in, but rather just closer toIDE ribbon cable is lifted up. The other 2ea are at the corner.
[* blue] NOTE: The screw on the lower
front - right and left corner of the disk drive is not in the hole that it appears to be in, but rather just closer to the cornerhard drive.