Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par Andrew Bookholt

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Remove 3ea 3mmthe three 3 mm T10 screwsscrews securing the hard drive to the Xbox. There is 1one screw on the rear left side of the hard drive that is only visible when the IDE ribbon cable is lifted up. The other 2eatwo are at the front - right and left sides of the hard drive.
[* icon_note] The screw on the lower left corner of the disk drive is not in the hole that it appears to be in, but rather just closer to the corner.
[* red] Remove 3ea 3mmthe three 3 mm T10 screwsscrews securing the hard drive to the Xbox. There is 1one screw on the rear left side of the hard drive that is only visible when the IDE ribbon cable is lifted up. The other 2eatwo are at the front - right and left sides of the hard drive.
[* icon_note] The screw on the lower left corner of the disk drive is not in the hole that it appears to be in, but rather just closer to the corner.