Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par Walter Galan

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Remove the three 3 mm T10 screws securing the hard drive to the Xbox.
[* icon_reminder]
There is one screw on the rear left side of the hard drive that is only visible when the IDE ribbon cable is lifted up. The other two are at the front right and left sides of the hard drive.
[* red] Remove the three 3 mm T10 screws securing the hard drive to the Xbox.
[* icon_reminder]
There is one screw on the rear left side of the hard drive that is only visible when the IDE ribbon cable is lifted up. The other two are at the front right and left sides of the hard drive.
[* icon_note] The screw on the lower left corner of the disk drive is not in the hole that it appears to be in, but rather just closer to the corner.