Modifications apportées à l'étape #5
Lignes de l'étape
| + | [* black] By gently doing the reverse and pushing it into the slot and then down. Make sure the screw holes line up! |
|---|---|
| + | [* black] If you've correctly installed it, your machine should resemble the picture with the Green circle; with no exposed copper and the screw holes should also line up. |
| + | [* black] If your copper contacts are still exposed, as in the picture with the Red "X", then you need only push the SSD gently deeper into place. |
| + | [* black] Now put the silver screw back in the hole. It should be screwed all the way down, but not too tight. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté