Modifications apportées à l'étape #1
Modifié par Nathaniel Stringer —
Modification approuvée par Nathaniel Stringer
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Using a spudger or flathead, create leverage in the corner of the backplate. Pry open the corner and move along the seam to the middle while twisting upwards to push the cover upwards. |
|---|---|
| - | [* black] Repeat |
| + | [* black] Using a spudger or a flathead screwdriver, create leverage in the corner of the backplate. Pry open the corner and move along the seam to the middle while twisting upwards to push the cover upwards. |
| + | [* black] Repeat on the other side. |