Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par JordanB500

Modification rejetée par Jake Devincenzi

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1).
[* red] Flip the optical drive assembly over and remove 6 Phillips #1 screws as shown.
[* yellowviolet] Remove the metal plate. Do not to disturb the brown ribbon cable.cable, using a Phillips #1 Screwdriver, turn the small knob one quarter turn clockwise
[* yellowviolet] Remove the metal plate. Do not to disturb the brown ribbon cable.cable, using a Phillips #1 Screwdriver, turn the small knob one quarter turn clockwise

Image 3

Ancienne version

Nouvelle version