Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Christopher Cox

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] At this point, your optical drive assembly should be separate from your GameCube and look like this.
[* redblack] Flip the optical drive assembly over and remove 86 Phillips #1 screws as shown.
[* redblack] Flip the optical drive assembly over and remove 86 Phillips #1 screws as shown.
[* yellow] Remove the metal plate, being careful not to disturb the brown ribbon cable.

Image 2

Ancienne version

Nouvelle version