Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par mwbisson

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] At this point, your Optical Drive Assembly should be separate from your GameCube and look like this.
[* orange] Flip drive assembly over and remove 8 screws as shown.
[* icon_caution] Remove metal plate, careful to not disturb the brown ribbon cable(showncable (shown in yellow)
[* icon_caution] Remove metal plate, careful to not disturb the brown ribbon cable(showncable (shown in yellow)