Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Miroslav Djuric

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] At this point, your Optical Drive Assemblyoptical drive assembly should be separate from your GameCube and look like this.
[* black] At this point, your Optical Drive Assemblyoptical drive assembly should be separate from your GameCube and look like this.
[* orange] Flip drive assembly over and remove 8 screws as shown.
[* icon_cautionyellow] Remove the metal plate, being careful to not to disturb the brown ribbon cable (shown in yellow)cable.
[* icon_cautionyellow] Remove the metal plate, being careful to not to disturb the brown ribbon cable (shown in yellow)cable.