Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Robert Wagner

Modification approuvée par Robert Wagner

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1).
[* red] Flip the optical drive assembly over and remove the 6 Phillips #1 screws as shown.
[* yellow] RemoveAfter the screws are removed, gently lift and remove the metal plate. DoBe careful not to disturb the brown ribbon cable.
[* red] Flip the optical drive assembly over and remove the 6 Phillips #1 screws as shown.
[* yellow] RemoveAfter the screws are removed, gently lift and remove the metal plate. DoBe careful not to disturb the brown ribbon cable.