Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Andrew Optimus Goldheart

Modification approuvée par Andrew Optimus Goldheart

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* yellow] Remove the blue wire.
[* orange] Use a #1Remove the 4 Phillips Screwdriver to remove the four (4)#1 screws connecting the circuit board to the optical drive assembly.
[* orange] Use a #1Remove the 4 Phillips Screwdriver to remove the four (4)#1 screws connecting the circuit board to the optical drive assembly.
[* icon_note] The fourth screw is located behind the screwdriver in the third picture