Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Lauren

Modification approuvée par Lauren

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* yellow] Remove the blue wire (as shown in yellow outline).
[*
by gently pulling.
[*
orange] RemoveShown in the third picture, remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assembly (shown in the third picture)assembly.
[* yellow] Remove the blue wire (as shown in yellow outline).
[*
by gently pulling.
[*
orange] RemoveShown in the third picture, remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assembly (shown in the third picture)assembly.
[* icon_note] The fourth screw is located behind the screwdriver in the third picture (highlighted in orange circles).