Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Robert Wagner

Modification approuvée par Robert Wagner

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* yellow] Remove the blue wire by gently pulling.
[* orange] Shown in the third picture, remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assembly.
[* icon_note] The fourth screw is located behind the screwdriver in the third picture (highlighted'''(highlighted in the orange circles)circle)'''.
[* icon_note] The fourth screw is located behind the screwdriver in the third picture (highlighted'''(highlighted in the orange circles)circle)'''.