Aller au contenu principal

Modifications apportées à l'étape #5

Modifié par Lauren

Modification approuvée par Lauren

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* icon_cautionblack] Gently lift the metal plate off of the drive assembly.
[* icon_caution]
Be careful not to sever the two wiresred wire or ribbon cable still attached to the two halves of the drive assembly.
[* black] Next,Then flip and rotatethe two halves of the drive assembly upside down as shown in the third picture.
[* icon_cautionblack] Gently lift the metal plate off of the drive assembly.
[* icon_caution]
Be careful not to sever the two wiresred wire or ribbon cable still attached to the two halves of the drive assembly.
[* black] Next,Then flip and rotatethe two halves of the drive assembly upside down as shown in the third picture.