Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Lauren

Modification approuvée par Lauren

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* yellow] Use a flathead screwdriver to release the two more clips located on the back half of the drive assembly.
[* blackicon_note] The final clip doesn't need to be released; the top half of the drive assembly will slide away from the lower half.
[* black] Finish removing the top half of the drive assembly from the base.
[* icon_caution] New line.
[* yellow] Use a flathead screwdriver to release the two more clips located on the back half of the drive assembly.
[* blackicon_note] The final clip doesn't need to be released; the top half of the drive assembly will slide away from the lower half.
[* black] Finish removing the top half of the drive assembly from the base.
[* icon_caution] New line.