Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Austin Blakely

Modification approuvée par Austin Blakely

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* yellow] Use a flathead screwdriver to release the two clips located on the back half of the drive assembly.
[* icon_note] The final clip doesn't need to be released; the top half of the drive assembly will slide away from the lower half.
[* black] Finish removing the top half of the drive assembly from the base.
[* icon_caution] Be careful not to detacheddetach the red wire or the white ribbon cable still attached.
[* icon_caution] Be careful not to detacheddetach the red wire or the white ribbon cable still attached.