Aller au contenu principal

Fix Your Stuff

Right to Repair

Parts & Tools

Modifications apportées à l'étape #1

Modifié par iRobot

Validation en attente


Lignes de l'étape

[* black] Remove the following 9 screws:
[* red] Two 3 mm Phillips from the edge of the logic board, near the battery
[* orange] Two 4 mm large head Phillips on the port side, from either corner.
[* yellow] One 6 mm Phillips near the sleep light.
[* green] Two 7.5 mm Phillips securing the battery connector to the metal framework.
[* blue] Two 5 mm Phillips from the logic board. These screws may not be present on some models.
[* icon_note] There will be two screws remaining that secure the airport card cage to the logic board (can't get them all).

Image 1

Aucune image précédente