Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Michael Vovaris

Modification rejetée par Jeff Suovanen

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Remove the following seven screws:
[* red] Six 1.6 mm PH000 Phillips screws securing the trackpad to the upper case.
[* red] Six 1.6 mm PH000 Phillips screws securing the trackpad to the upper case.
[* orange] One 1.4 mm T5 Torx set screw from its tapped hole near the front edge of the upper case.
[* icon_reminder] During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.