Historique de l'étape n° 1 de Heyday Wireless Speaker 8125 Speaker Replacement

Modifications apportées à l'étape #1

Modifié par Ryan Butler — 8 mars 2023

Modification approuvée par Ryan Butler

	[* black] Grab the heat gun and turn it on with low heat
	[* black] Point it down on the speaker at a distance of about 8-10 inches while moving in a circular motion around the edges of the speaker , for about 30 seconds
	[* black] Put the heat gun down and using the plastic spudger lift under the speaker around the edges where there is adhesive holding down the speaker
+	[* black] Once speaker isn't being held down by adhesive simply push the speaker out
+	[* black] Pull the black cover off using your hands
	[* black] Once speaker isn't being held down by adhesive simply push the speaker out