Modifications apportées à l'étape #4
Lignes de l'étape
| + | [title] Remove components |
|---|---|
| + | [* red] Damage caused by heat generated by worn out relay contatc. |
| + | [* black] Desolder and remove both relays, varistor and resistor. |
| + | [* orange] Board with components removed. Relay terminal is in bad shape and melted on the board. |
| + | [* black] Clean the damaged soldering pads on both sides before installing new components. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté