Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Walter Galan

Modification approuvée par Walter Galan

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Remove two 4.3 mm T5 screws securing the iSight camera board to the top of the rear case.
- [* icon_note] When reinstalling, be careful not to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear case.
+[* red] Remove the two 4.3 mm T5 screws securing the iSight camera board to the top of the rear enclosure.
+[* icon_note] When reinstalling, be careful not to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear enclosure.