Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Evan Noronha

Modification approuvée par Evan Noronha

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Remove the two 4.3 mm T5 Torx screws securing the iSight camera board to the top of the rear enclosure.
-[* icon_note] During reassembly, be careful ***not*** to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear enclosure.
+[* red] Remove the two 4.3 mm T5 Torx screws securing the camera board to the top of the rear enclosure.
+[* icon_reminder] During reassembly, be careful ***not*** to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear enclosure.