Modifications apportées à l'étape #1
Modifié par Michael Torres —
Modification approuvée par Michael Torres
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Line up the new RAM sticks to the sockets and push them in until you hear a clicking sound. |
|---|---|
| - | [* black] Push back the socket holders. |
| + | [* black] You will see a piece of plastic covering the RAM. You can flip it to the other side to reveal the RAM. Do not pull the plastic cover. |
| + | [* black] You will see both RAM sticks that you will need to remove by pulling back the socket holders on the sides of the RAM sticks, and pulling the RAMS sticks out. |
| + | [* black] Before you install your new RAM sticks, make your they match in Gigabit size and brand. If they aren't, the sticks wouldn't be able to reach their peak performance. |
| + | [* black] Align your new RAM sticks on to the sockets, and then push them down until you hear hear a "click" sound. This is to prevent any damage to the pins below the RAM sticks |