Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #7

Modifié par Ben Eisenman

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Lift the upper case off completely and disconnect the multicolored speaker cable from the logic board. As before, make sure you're pulling only on the connector and not on the socket.
[* blackicon_note] Tip: Thethe multi-coloured cable ismay be easier and less daunting to disconnect after removing the top heat shield. Prop the top case upright while removing the shield - the connector is then much more accessible.
[* blackicon_note] Tip: Thethe multi-coloured cable ismay be easier and less daunting to disconnect after removing the top heat shield. Prop the top case upright while removing the shield - the connector is then much more accessible.