Modifications apportées à l'étape #1
Modifié par Jake Devincenzi —
Modification approuvée par Jake Devincenzi
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* icon_reminder] Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters. |
|---|---|
| [* red] Remove the hex head bolt from the top of the access door on the pump head. | |
| [* icon_reminder] On reassembly, this bolt should be hand-tight. |