Modifications apportées à cette étape
Modifié par Alexander Webb —
Modification approuvée par Alexander Webb
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Unfasten the screws that hold the back cover on. These should utilize a PH1 head and be approximately 1/2 threaded with an overall length of 4.15 millimeters. These screws should be held in place by a small plastic washer which secures them to the cover and should not be loose. Use a well labeled parts tray to contain any loose parts. |
|---|---|
| + | [* black] Unfasten the screws that hold the back cover on. |
| + | [* black] These should utilize a PH1 head and be approximately 1/2 threaded with an overall length of 4.15 millimeters. These screws should be held in place by a small plastic washer which secures them to the cover and should not be loose. |
| + | [* black] Use a well labeled parts tray to contain any loose parts. |