Historique de l'étape n° 1 de Lenovo ThinkPad X260 Back Cover Replacement

Modifications apportées à l'étape #1

Modifié par Elizabeth Castillo — 27 juil. 2023

Modification approuvée par Elizabeth Castillo

	[* icon_caution] WARNING: Always make sure that the device is unplugged and turned off.
-	[* icon_caution] ~~Make sure to label~~ each part taken out to ~~keep trach of~~ which piece goes where.
+	[* icon_caution] Label each part taken out to track which piece goes where.
	[* black] Unfasten the screws that hold the back cover on.
	[* icon_note] The screws which need to be removed are circled in the above image.
	[* icon_reminder] These should utilize a PH1 head and be approximately 1/2 threaded with an overall length of 4.15 millimeters. These screws should be held in place by a small plastic washer which secures them to the cover and should not be loose. This is illustrated in the third image.
-	[* icon_reminder] Use a well labeled parts tray to contain any loose parts.