Modifications apportées à l'étape #1
Modifié par Elizabeth Castillo —
Modification approuvée par Elizabeth Castillo
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* icon_caution] WARNING: Always make sure that the device is unplugged and turned off. | |
| - | [* icon_caution] Label each part taken out to track which piece goes where. |
| - | [* black] Unfasten the screws that hold the back cover on. |
| - | [* icon_note] The screws which need to be removed are circled in the above image. |
| - | [* icon_reminder] These should utilize a PH1 head and be approximately 1/2 threaded with an overall length of 4.15 millimeters. These screws should be held in place by a small plastic washer which secures them to the cover and should not be loose. This is illustrated in the third image. |
| + | [* black] Unfasten the screws on the back cover plate. Screws that should be unfastened are labeled with red circles. |
| + | [* icon_note] These screws should utilize a PH1 head and be approximately 1/2 threaded with an overall length of 4.15 millimeters. |
| + | [* icon_note] These screws should be held in place by a small plastic washer which secures them to the cover and should not be loosened. This is illustrated in the third image. |