Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Andrew Bookholt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* icon_caution] The next few steps bring your hands close to the exposed face of the power supply. ***Do not*** touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board.
-[* black] Disconnect the DC-In cable by using your index finger to depress the locking mechanism while you pull the connector away from its socket on the power supply.
+[* black] Disconnect the DC-In cable by using your index finger to depress the locking mechanism on the back of the connector while you pull the connector away from its socket on the power supply.
[* black] Once the locking mechanism has cleared the socket, pull the DC-In connector away from the power supply.