Modifications apportées à l'étape #2
Modifié par Spencer Day —
Modification approuvée par Spencer Day
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Unfasten the rear camera assembly | |
| - | [* icon_note] You may need to hold the mmWave antenna cable out of the |
| + | [* icon_note] You may need to hold the mmWave antenna cable out of the way while removing the rear camera assembly screws. |
| [* red] Use a T3 Torx driver to remove the 3.5 mm‑long 3IP Torx Plus screw securing the top left corner of the rear camera assembly. | |
| [* orange] Use a T3 Torx driver to remove the 5 mm‑long 3IP Torx Plus screw securing the top right corner of the rear camera assembly. |