Modifications apportées à l'étape #5
Modifié par Nicholas Clauser —
Modification approuvée par Nicholas Clauser
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove the screw located in the M.2 slot. |
|---|---|
| + | [* red] Remove the 2mm Philips screw located in the M.2 slot. |
| [* icon_caution] Do not lose this screw! It must be reused later. | |
| [* orange] Gently grasp the SSD from where the screw was located. | |
| [* black] Pull the SSD to remove it from the M.2 slot. If the SSD does not immediately release, ***gently ***wiggle it while pulling. | |
| [* black] Once you have removed the old hard drive, pull it out of the plastic heatshield. | |
| [* icon_note] This heatshield will be reused with your new hard drive. |