Historique de l'étape n° 8 de iPod Nano 7th Generation Logic Board Assembly Replacement

Modifications apportées à l'étape #8

Modifié par Jake Devincenzi — 20 août 2013

Modification approuvée par Jake Devincenzi

	[* black] Use a spudger to pry the headphone jack off of the adhesive holding it to the rear case.
-	[* icon_caution] *Do not* remove the headphone jack entirely, its ribbon cable is still soldered to the logic board assembly.
+	[* icon_caution] *Do not* remove the headphone jack entirely; its ribbon cable is still soldered to the logic board assembly.