Modifications apportées à l'étape #5
Lignes de l'étape
| [title] Removing the Motor from the Housing | |
| [* black] Turn the motor container on its side, with the wires pointing up. | |
| [* black] Unscrew the 3 screws attaching the motor to the housing. | |
| [* black] Take the yellow wire out of the screw. | |
| - | [* black] Use a wrench to |
| + | [* black] Use a wrench to remove the bolt from the shaft of the motor, located on the opposite side. |
| [* icon_note] If rust has accumulated on the motor shaft, you may wish to use sandpaper to remove it to make the motor easier to remove. | |
| [* black] Firmly grasp the motor from the side where the screws were previously located and pull to remove it. | |
| [* icon_note] The white label on the side of the motor contains the model number of the blower motor which you may use as a reference when ordering a replacement, if necessary. |