Modifications apportées à l'étape #1
Modifié par Kory Lajoie —
Modification approuvée par Kory Lajoie
- Avant
- Après
- Inchangé
Lignes de l'étape
[* black] Flip the projector upside down so that the bottom is facing up. | |
- | [* red] Remove the |
+ | [* red] Remove the 1.0 cm screws with a Phillips #0 screwdriver. |
[* icon_note] The screws are deep in the holes, so be careful not to drop the screws. | |
- | [* orange] Remove the |
+ | [* orange] Remove the 2.0 cm screws with a Phillips #0 screwdriver. |