Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #7

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Remove the video connection screws
[* icon_reminder] If you do not have a Nut driver on hand, needlenoose plyers can also be used for this step.
[*
black] Remove the 4 screw pins for the video cables from the monitor. Use a '''5mm nut''' bitNut''' bit/driver to remove the pins.
[* icon_note] If you do not have a 5mm Hex driver on hand, needlenoose plyers will work in place of
screw pins from the Hex bitpower supply shield.
[* icon_reminder] If you do not have a Nut driver on hand, needlenoose plyers can also be used for this step.
[*
black] Remove the 4 screw pins for the video cables from the monitor. Use a '''5mm nut''' bitNut''' bit/driver to remove the pins.
[* icon_note] If you do not have a 5mm Hex driver on hand, needlenoose plyers will work in place of
screw pins from the Hex bitpower supply shield.