Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #12

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Identify the power supply
[* icon_caution] '''If any of the capacitors have bulged, they may stillprobably have a chargeresidual charge left. Handle the power supply with extreme cautioncaution and assume there is a residual charge left!'''
[* black] As you keep that plate lifted up, maneuverWith the power supply shield coveringremoved from the power suppy and control boards up. After you have this removedmonitor, identify the power supply.
[* black] After you remove
Write down the shield identifyuF ratings and voltages of the original capacitors. Replace all of the capacitors and replace them all. You can go up as much as you want to the points thaton the new caps will not fit the existing points. '''Make sureboard now. '''If you getcannot find the right ones ororiginal capacitors, double the uF ratings. Ifratings to the closet you use a smaller capacitor it will bulge and explodesee for sale. DO NOT double the voltage whatsoever.'''
[* icon_note] Acer usedYou should only concern the following capacitors at the timeof these ratings: 2x 25V 1000uF capacitors1000uF, 1x 10V 1000uF capacitor1000uF, 2x 25V 220uF capacitors220uF. This only matters if you intend to match the factory specified capacitor ratingscapacitors on the board when you replace them. If doubled you double them, make sure youhave to exceed the original uFcapacitors and voltages and notcannot go under. Going under or they will end up causing them to fail when you turn the monitor is turned on.
[* icon_note] Regarding the filter capacitor: You can replace the filter capacitor on the AC in side if you want. This capacitor usually does not require replacement and is the most expensive. You will also probably find yourself doubling the original capacitors since the Acer rated ones are hard to find. Your mileage on matching the originals will vary.
[* icon_caution] '''If any of the capacitors have bulged, they may stillprobably have a chargeresidual charge left. Handle the power supply with extreme cautioncaution and assume there is a residual charge left!'''
[* black] As you keep that plate lifted up, maneuverWith the power supply shield coveringremoved from the power suppy and control boards up. After you have this removedmonitor, identify the power supply.
[* black] After you remove
Write down the shield identifyuF ratings and voltages of the original capacitors. Replace all of the capacitors and replace them all. You can go up as much as you want to the points thaton the new caps will not fit the existing points. '''Make sureboard now. '''If you getcannot find the right ones ororiginal capacitors, double the uF ratings. Ifratings to the closet you use a smaller capacitor it will bulge and explodesee for sale. DO NOT double the voltage whatsoever.'''
[* icon_note] Acer usedYou should only concern the following capacitors at the timeof these ratings: 2x 25V 1000uF capacitors1000uF, 1x 10V 1000uF capacitor1000uF, 2x 25V 220uF capacitors220uF. This only matters if you intend to match the factory specified capacitor ratingscapacitors on the board when you replace them. If doubled you double them, make sure youhave to exceed the original uFcapacitors and voltages and notcannot go under. Going under or they will end up causing them to fail when you turn the monitor is turned on.
[* icon_note] Regarding the filter capacitor: You can replace the filter capacitor on the AC in side if you want. This capacitor usually does not require replacement and is the most expensive. You will also probably find yourself doubling the original capacitors since the Acer rated ones are hard to find. Your mileage on matching the originals will vary.
[* icon_note] Regarding the filter capacitor: You can replace the filter capacitor on the AC in side if you want. However, this capacitor does not require replacement in most cases. This capacitor will set you back the most should you replace it.
[* icon_note] You will probably have to double up the uF rating on the new capacitors, seeing as the Acer rated ones are very hard to find. '''If you decide to double them you can not go under on uF or voltage, or the capacitor will explode.'''