Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #12

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[* black] As you keep that plate lifted up, maneuver the shield covering the power suppy and control boards up. After you have this removed, identify the power supply.
[* black] After you identify the bad capacitor, '''make sure you get the right one, or the capacitor will explode when the monitor is turned on'''.
[* icon_note] You can go up in voltage and uF ratings as much as you can, but the new capacitors have to fit in place where the old capacitor is. '''You can not go under on uF or voltage, or the capacitor will explode.'''
[* icon_note] For a full recap, you
need to match the voltage(iffollowing capacitors: 2x 25V 1000uF capacitors, 1x 10V 1000uF capacitor, 2x 25V 220uF capacitors if you have a 10V, it hasintend to be 10V), butmatch the uF rating can be increasedfactory specified capacitors. Double these as you please if you decide to some extentdo so.
[* icon_note] You can go up in voltage and uF ratings as much as you can, but the new capacitors have to fit in place where the old capacitor is. '''You can not go under on uF or voltage, or the capacitor will explode.'''
[* icon_note] For a full recap, you
need to match the voltage(iffollowing capacitors: 2x 25V 1000uF capacitors, 1x 10V 1000uF capacitor, 2x 25V 220uF capacitors if you have a 10V, it hasintend to be 10V), butmatch the uF rating can be increasedfactory specified capacitors. Double these as you please if you decide to some extentdo so.