Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à cette étape

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Removing the power supply
[* black] Remove the 4 screws from the power supply. '''Important: The black screw at bottom left is largera ground screw, and will fit only fit in one place. Keep this hole. '''The screw separated from the rest of the screws. It is marked in blue is a ground screw. This will only fit in this holeblue.'''
[* black] Lift the power supply up at a rightslight angle to clear the mounting holes and start to remove it. Do notIf you lift the board out too much ormuch, you risk bendingmay damage the pins on the board, and damaging pinspotentially the video processing board.
[* black] Remove the 4 screws from the power supply. '''Important: The black screw at bottom left is largera ground screw, and will fit only fit in one place. Keep this hole. '''The screw separated from the rest of the screws. It is marked in blue is a ground screw. This will only fit in this holeblue.'''
[* black] Lift the power supply up at a rightslight angle to clear the mounting holes and start to remove it. Do notIf you lift the board out too much ormuch, you risk bendingmay damage the pins on the board, and damaging pinspotentially the video processing board.