Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à cette étape

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Removing theRemove the power supply
[* black] Remove the 4 screws from the power supply. '''Important: Theicon_caution] '''The black screw (marked in Blue) is a ground screw, and will onlyscrew. It does not fit in one place. Keepanywhere else. Do not lose this screw separated fromscrew!'''
[* icon_note] Only lift
the rest ofpower supply up at a slight angle. Lifting it up too much can damage the screws. It is marked in blue.'''power supply and potentially the video processing board.
[* black] LiftRemove the 4 screws from the power supply. Once this is done, lift the power supply up at a slight angle to clear the mounting holes and start toso you can remove it. If you lift the board out too much, you may damagepower supply from the pins on the board, and potentially the video processing boardmonitor.
[title] Removing theRemove the power supply
[* black] Remove the 4 screws from the power supply. '''Important: Theicon_caution] '''The black screw (marked in Blue) is a ground screw, and will onlyscrew. It does not fit in one place. Keepanywhere else. Do not lose this screw separated fromscrew!'''
[* icon_note] Only lift
the rest ofpower supply up at a slight angle. Lifting it up too much can damage the screws. It is marked in blue.'''power supply and potentially the video processing board.
[* black] LiftRemove the 4 screws from the power supply. Once this is done, lift the power supply up at a slight angle to clear the mounting holes and start toso you can remove it. If you lift the board out too much, you may damagepower supply from the pins on the board, and potentially the video processing boardmonitor.