Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #13

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] BeginningOptional: Mark the capacitor replacement: Markposition of the capacitor polarityold capacitors
[* black] YouIf you are not sure about your ability to put the caps in correctly, you may wish to markreference the lead polarity on the back ofold capacitors and note the power supply boardoriginal installation. Do this with permanent marker, and use this to install the capacitor, as to avoid putting it in wrong. Youmarker. The marks will no longer need thiscome off once you have solderedstart soldering in the capacitor incapacitors.
[title] BeginningOptional: Mark the capacitor replacement: Markposition of the capacitor polarityold capacitors
[* black] YouIf you are not sure about your ability to put the caps in correctly, you may wish to markreference the lead polarity on the back ofold capacitors and note the power supply boardoriginal installation. Do this with permanent marker, and use this to install the capacitor, as to avoid putting it in wrong. Youmarker. The marks will no longer need thiscome off once you have solderedstart soldering in the capacitor incapacitors.
[* icon_note] Putting the capacitor in the wrong way will cause the capacitor to explode. Permanent marker on the solder mask will not affect the rest of the board.