Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #13

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] (Optional) Capacitor polarity marking
[* icon_note] '''If the PCB is marked to avoid mis-installation, these marks will come off when the capacitor is soldered into the board.'''
[* black]
If you are unsure of the position of the capacitors, writetake a note of the polarity on the solder mask as a reference using aPCB with permanent marker. If you install'''If the capacitors are installed incorrectly, they will explode when given power. '''Note:''' These marks will wear off when the capacitor is soldered in.power.'''
[* icon_note] '''If the PCB is marked to avoid mis-installation, these marks will come off when the capacitor is soldered into the board.'''
[* black]
If you are unsure of the position of the capacitors, writetake a note of the polarity on the solder mask as a reference using aPCB with permanent marker. If you install'''If the capacitors are installed incorrectly, they will explode when given power. '''Note:''' These marks will wear off when the capacitor is soldered in.power.'''