Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #13

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[* black] You may wantwish to mark the lead polarity on the back of the power supply board with permanent marker, and use this to install the capacitor, as to avoid putting it in wrong.
[* black] You may wantwish to mark the lead polarity on the back of the power supply board with permanent marker, and use this to install the capacitor, as to avoid putting it in wrong.
[* icon_note] Putting the capacitor in the wrong way will cause the capacitor to explode. Permanent marker on the solder mask will not affect the rest of the board.