Aller au contenu principal

Réparez vos affaires

Droit à la réparation


Modifications apportées à l'étape #13

Modifié par Nick

Modification approuvée par Nick


Lignes de l'étape

[* black] You may wish to mark the lead polarity on the back of the power supply board with permanent marker, and use this to install the capacitor, as to avoid putting it in wrong.
[* icon_note] Putting the capacitor in the wrong way will cause the capacitor to explode. Permanent marker on the solder mask will not affect the rest of the board.
[* icon_reminder] You can find this mark under the capacitor, but if you are a novice to this I would not use those markings, and make your own to avoid screwing up the replacement.