Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #14

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Starting the repair: Add flux to the leads
[* icon_noteicon_reminder] If you do not have flux on hand, newadd fresh solder can be used to help melt the original soldercapacitor leads.
[* icon_note] Onlyicon_reminder] Do not use asa lot of flux. Using too much flux as you need. Using more then you need will complicate board cleaning later.
[* black] Put someTo prepare the board for capacitor replacement, put fresh flux or solder on the leads of the old capacitorscapacitor leads. This will help melt the old solder without the need to add new solder toease the boardremoval process.
[* icon_noteicon_reminder] If you do not have flux on hand, newadd fresh solder can be used to help melt the original soldercapacitor leads.
[* icon_note] Onlyicon_reminder] Do not use asa lot of flux. Using too much flux as you need. Using more then you need will complicate board cleaning later.
[* black] Put someTo prepare the board for capacitor replacement, put fresh flux or solder on the leads of the old capacitorscapacitor leads. This will help melt the old solder without the need to add new solder toease the boardremoval process.