Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #15

Modifié par Nick

Modification approuvée par Nick

Avant
Après
Inchangé

Lignes de l'étape

[title] Starting the repair: Removing the old capacitors
[* icon_caution] This guide does not teach you how to solder. If you need a how to on soldering, refer to this guide: [guide|750]
[*
icon_caution] Do not touch the soldering iron while removing the old caps! HoldIf you do not have something like Helping Hands, hold the board at an angle you will not accidentally touch the soldering iron in any wayangle.
[* icon_reminder] When there is one or two failed capacitorscapacitors fail, the rest are likely to follow. To avoid replacing the capacitors multiple timesfail. For this reason, it is betterbest to replace them as a set.set at once.
[* icon_reminder] If you do not know how to solder, refer to this guide: [guide|750]

[* black] Take the board out to a place you can solder the new caps on. To remove the old capacitors from the board,and heat one leadleg up at a time. Once thiswhile the solder is done, remove that side of the capacitormelted. Do this for both sides of all of the capacitors you are replacing. Do not worry about the solder yet; we will clean this later.
[* icon_caution] This guide does not teach you how to solder. If you need a how to on soldering, refer to this guide: [guide|750]
[*
icon_caution] Do not touch the soldering iron while removing the old caps! HoldIf you do not have something like Helping Hands, hold the board at an angle you will not accidentally touch the soldering iron in any wayangle.
[* icon_reminder] When there is one or two failed capacitorscapacitors fail, the rest are likely to follow. To avoid replacing the capacitors multiple timesfail. For this reason, it is betterbest to replace them as a set.set at once.
[* icon_reminder] If you do not know how to solder, refer to this guide: [guide|750]

[* black] Take the board out to a place you can solder the new caps on. To remove the old capacitors from the board,and heat one leadleg up at a time. Once thiswhile the solder is done, remove that side of the capacitormelted. Do this for both sides of all of the capacitors you are replacing. Do not worry about the solder yet; we will clean this later.